Cleaning And Care - Silvercrest COOL-ZONE DEEP FAT FRYERSEF 2300 A1 Bedienungsanleitung

Cleaning and care

SEF 2300 A1
IB_86360_SEF2300A1_LB4.indb 13 IB_86360_SEF2300A1_LB4.indb 13
WARNING – RISK OF ELECTRIC SHOCK!
► Always remove the plug from the mains power socket before cleaning the
appliance.
► UNDER NO CIRCUMSTANCES may the appliance or parts of it be
submersed in liquids! This could result in a potentially fatal electric shock
and the appliance could be damaged.
Never open the control and heating element 0 of the appliance.
►
WARNING – RISK OF BURNS!
► Allow the appliance to cool down completely before cleaning it.
CAUTION – PROPERTY DAMAGE!
► When cleaning the components, do not use aggressive or abrasive cleaning
agents or materials such as scouring milk or steel wool. These could dam-
age the upper surfaces of the appliance!
To simplify cleaning, dismantle the deep fat fryer:
1) Remove the lid.
2) Remove the cover of the permanent metal fi lter 1 and lift the permanent
metal fi lter 2 out of the recess 3.
3) Remove the frying basket 6.
4) Pull the control and heating element 0 upwards out of the guide rails.
Place the control and heating element 0 in a clean and dry location.
5) Remove the stainless steel container w and pour out the cooled fat or oil.
The frying basket 6 and the stainless steel container w can be cleaned in
■
the dishwasher. They are suitable for dishwashers.
Clean the housing e with a moist cloth. If required, use a mild detergent on
■
the cloth.
Clean the control and heating element 0 with a moist cloth. If necessary,
■
add a little mild detergent to the cloth. Wipe this off afterwards using a
damp cloth so that all detergent residue is removed. Dry the control and
heating element 0 thoroughly.
Clean the permanent metal fi lter 2 in warm water containing a mild detergent.
■
GB
13
07.11.13 15:30 07.11.13 15:30