adaPtiVe thermoregulation Herzlichen Glückwunsch! Fühlen Sie sich rundum wohl Die Textilie kühlt Sie Mit Ihrem Kauf haben Sie sich für ein hochwer- ab, wenn Ihnen heiß ist, und hält Sie bei Kälte tiges Produkt entschieden. Machen Sie sich vor länger trocken Kühlt und mindert die Entstehung der ersten Verwendung mit dem Produkt vertraut.
tipps zum Skaten fersenbremse (abb. C): Wenn Ihre Inlineskates mit Bremsen ausgestattet Hinweis: sind, denken Sie daran, diese zu benutzen. Wir empfehlen das Skaten in Skate- Heben Sie die Spitze des Skates, an dem Parks sowie einen Skate-Kurs mit die Bremse montiert ist, leicht an und drücken lehrer.
ausziehen Wartung Vom auslieferungszustand zum austausch der bremse (abb. l) anziehen vorbereiten Hinweis: abgenutzte bremsen funktionieren nicht Wichtig! ordnungsgemäß. achten Sie auf einen/den korrekten ein Winkel von mehr als 40 Grad zwi- Sitz ihrer inlineskates. der außenstiefel schen rahmen und oberfläche ist ein sollte sich beim Schließen des Schnell- Hinweis auf abgenutzte bremsen.
Rollen nutzen sich ab. Diese Abnutzung ist von • Drücken Sie das andere Lager durch Druck vielen Faktoren abhängig, wie zum Beispiel mit einem Innensechskantschlüssel heraus. vom Stil des Skatens, vom Boden, von Größe • Drücken Sie ein neues Lager ein. Drehen Sie und Gewicht des Benutzers, den Wetterbe- die Rolle um, setzen Sie den Abstandshalter dingungen, dem Material der Rollen und von...
3 Jahre Garantie • rollen blockieren Ziehen Sie die Achsschrauben nicht zu fest Das Produkt wurde mit großer Sorgfalt und unter ständiger Kontrolle produziert. Sie erhalten • Skate zieht nach links oder rechts auf dieses Produkt drei Jahre Garantie ab Dies kann vom Benutzer selbst abhängig Kaufdatum.
adaPtiVe thermal control Congratulations! Feel good all over The textile will cool you down With your purchase you have decided on a when you’re hot, and keep you dry longer in high-quality product. Get to know the product cold weather Cools and minimises perspiration. before you start to use it.
Skating tips Heel brake (figure C): If your inline skates are fitted with brakes then note: remember to use them. Lift the point of the skate We recommend skating in skate parks where the brake is mounted and push the brake and taking a skating course with an into the ground.
removing the skates Maintenance Prepare the skates for wear Changing the brake (figure l) following delivery note: Worn brakes do not function correctly. important! an angle of more than 40 degrees ensure that your inline skates fit between the frame and the surface is correctly.
Rollers become worn. The wear depends on • Push in a new bearing. Turn the roller many factors such as skating style, surfaces, the around, insert the spacer, and then push in a size and weight of the user, weather conditions, second new bearing.
3-year warranty • the brake is not working properly Change the brake if the angle between The product was produced with great care and the brake and the ground is greater than 40 under constant supervision. You receive a three- degrees, i.e.
Seite 20
DELTA-SPORT HANDELSKONTOR GMBH Wragekamp 6 • D-22397 Hamburg Version: 02/2014 Delta-Sport-Nr.: KI-1740 IAN 93712...