Gastroback 42601 Basic Bedienungsanleitung Seite 21

Directions for use
Always keep the working area dry and clean.
WARNING: Do not pour or drip any liquids on the motor housing or power cord.
When liquids are spilled on the motor housing, immediately unplug the appliance
and dry the motor housing to avoid risk of electric shock or fire. Do not attempt to
operate the appliance, when liquids are on or in the motor housing. Take the appliance
to an authorised service centre for examination and repair.
1. Pour whole coffee beans directly into removable grinding bowl and fill to desired
level as indicated inside the bowl. (Min 2 cups – Max 12 cups).
WARNING: Do not overfill the grinding bowl to prevent overloading.
fill mark (´12`) inside the
WARNING: If the grinding bowl is positioned on the motor housing, and the plug is
connected to the power outlet, do not insert your fingers, a wooden or plastic spoon or
similar cooking utensils or foreign substances in the grinding bowl.
2. Return the lid to locked position over the removable
grinding bowl. Make sure the align symbol on the lid is
aligned with the marking
the lid clockwise to lock in position. Refer to ´Assembling the
appliance` for precise instructions.
NOTE: The coffee grinder will not operate without the lid and
grinding bowl in locked position.
3. Rotate the grind selector control to select the desired fineness
of grind. Rotating from left to right, coarse to finer (picture E).
Refer to ´Grind Selector Control` for tips on grinding finenesse.
4. The appliance features an intelligent timer. Selecting the amount
of cups you need the precision timer will be set (picture F).
NOTE: The grinding time depends on the desired finenesse
selected and amount of cups needed.
Position the advanced intelligent timer to the total number of cups
to be ground. Slide up and down from 2 cups to 12 cups.
5. Slowly release the power plug from the storage position by
pulling outward until it stops. Insert the power plug into a
230/240v power outlet. The appliance is now ready to operate.
grinding bowl (picture D)
on top of the motor housing. Turn
21
Pay attention to the max
.
D
E
F