Events; General Settings; Preset / Tour / Pattern - Abus IPCS82520 Bedienungsanleitung

7.5.7 Events

7.5.7.1 General settings

General settings for PTZ control, e.g. control speed
Enable proportional pan:
Enable preset freezing:
Preset speed:
Manual speed:
Auto-scan speed:
Zoom speed:
Zoom status:
PT status:
Preset status:
Resume time:

7.5.7.2 Preset / Tour / Pattern

Control keys:
Zoom + / Zoom -:
Focus + / Focus -:
Aperture + / Aperture -:
Speed controller (+/-):
Tab: Presets:
To call up a preset, select a preset row. A further "Call" option will then appear. There will also be
Tab: Patrol:
Pan and tilt speeds are reduced in proportion to the zoom factor.
The video stream is paused briefly as the system switches from
one preset to another.
PTZ speed when retrieving a preset.
PTZ speed for manual control.
PTZ speed for auto-scan action.
General setting for the zoom speed.
On-screen display duration for the zoom status.
Angle display duration for the pan/tilt viewing direction.
Display duration for the preset number.
When the Dome is restarted, resume the action performed
xx seconds before the restart.
Control keys for orientation of the PTZ camera head (left, right
etc.)
Camera module zoom in and zoom out
not used
not used
This controller can be used to adjust the pan/tilt speed.
To configure a preset, first guide the camera to the desired
point incl. zoom setting, then select a preset row. Assign a
new name if necessary (standard is "Preset x"). Now press the
"Configure" button.
another option to delete the preset.
To configure a patrol, first select a patrol (e.g. 01), then press
the + button at the bottom of the patrol dialogue; this will then
add a new patrol step. Now select a preset, choose the length
of time to remain on this patrol step and set the speed for the
101