Specifications - Autotek A1800 Benutzerhandbuch

MODELS
CHANNELS
CIRCUIT
OUTPUT POWER RMS 13,8 V
Watts on 4 Ohms
Watts on 2 Ohms
OUTPUT POWER MAX. 13,8 V
Watts on 4 Ohms
Watts on 2 Ohms
Damping Factor
Signal-to-Noise Ratio
THD&N
Input Sensitivity
Input Impedance
FILTER
X-Over Modes
Various Lowpassfilter
Various Highpassfilter/Subsonicfilter
Bass Boost @ 45 Hz
Bass Remote
Fuse Ratings
Dimensions
Width & Height
Length
Technical specifications are subject to change! Errors are reserved!
For damages on the vehicle and the device, caused by handling errors of the device, we can't assume liability.
All AUTOTEK Amplifiers are tagged with a individual serialnumber, which will be registerd for statistic and service conditional
purposes.
All Crunch Amplifiers are tagged with a E-Certification Number and also a CE-Certification Mark. Thereby these devices are
ceritified for a use inside vehicles inside the European Union (EU).
The warranty conditions comply to the common consumer acts of the European Union (EU).
S P E C I F I C A T I O N S
A1800
1
CLASS A/B
Analog
1 x 425
1 x 800
1 x 850
1 x 1600
800
90 dB
0,05%
5 - 0.2 V
47 kOhm
LP/BP - Full - HP
40 - 150 Hz
15 - 55 Hz
0 - 12 dB
•
2 x 50 A
237 x 55 mm
480 mm
2 1