Using Your Refrigerator; Temperature Control And Adjustment; Thermostat Setting Button - Beko RCHE390K30XP Bedienungsanleitung

5

Using your refrigerator

Temperature Control And Adjustment

The operating temperature is
regulated by the temperature control.
Warm
1 2
(Or) Min.
1=Lowest cooling setting
(Warmest setting).
5=Highest cooling setting (Coldest
setting).
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
Please note that there will be
different temperatures in the cooling
area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also
depends on ambient temperature,
the frequency with which the door is
opened and the amount of foods kept
Cold
3 4 5
Max.
inside.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.

Thermostat setting button

The interior temperature of your
refrigerator changes for the following
reasons;
• Seasonal temperatures,
• Frequent opening of the
door and leaving the door open for
long periods,
• Food put into the
refrigerator without cooling down to
the room temperature,
• The location of the
refrigerator in the room (e.g.
exposing to sunlight).
• You may adjust the varying
interior temperature due to such
reasons by using the thermostat.
Numbers around the thermostat
button indicates the cooling
degrees.
• If the ambient temperature
is higher than 25°C, turn the
thermostat button to maximum
position.
• If the ambient temperature
is lower than 25°C, turn the
thermostat button to minimum
position.
16
EN