Activation And Deactivation Of The Outer Rings; The Automatic Heat Up - AEG EE4013021 Benutzerhandbuch

22
Operating instructions
Automatic Switch Off times
Heat setting
Stops after

Activation and deactivation of the outer rings

You can adjust the surface you cook to the dimension of the cookware.
To activate the outer ring touch the sensor field
more outer rings touch the same sensor field again. The subsequent indicator comes on.
Do the procedure again to deactivate the outer ring. The indicator goes out.

The automatic heat up

Automatic heat up function sets the highest heat setting for some time, and then decreases
to the necessary level. To switch it on turn the cooking zone knob to the right until you see
in the display. After that set the heat setting immediately.
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone: touch
cooking zone comes on.
• To activate the Count Down Timer: touch
minutes). When the indicator of the cooking zone start to flash slow, the time counts
down.
• To see the remaining time: set the cooking zone with
zone starts to flash quickly. The display shows the remaining time.
• To change the Count Down Timer: set the cooking zone with
• To deactivate the timer: set the cooking zone with
counts back to
also touch
, -
6 hours
00
. The indicator of the cooking zone goes out. To deactivate you can
and at the same time.
-
5 hours
/ /
11
10
9
8
7
6
5
4
3
2
1
0
again and again until the indicator of a necessary
of the timer to set the time (
. Touch
4 hours 1.5 hours
. The indicator comes on. For
1 2 3 4 5 6
00
. The indicator of the cooking
. Touch
. The remaining time
-
7 8 9
99
-
or .