Control Panel; Frostmatic Function; High Temperature Alarm - AEG A93100GNW0 Benutzerinformation

CONTROL PANEL

High temperature alarm light
1
Pilot light
2
FROSTMATIC light
3
FROSTMATIC switch
4
Alarm reset switch

FROSTMATIC FUNCTION

You can activate the FROSTMATIC func-
tion by pressing the FROSTMATIC switch.
The FROSTMATIC light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing FROSTMATIC
switch. The FROSTMATIC light will switch
off.

HIGH TEMPERATURE ALARM

An increase in the temperature in the
freezer (for example due to an power fail-
ure) is indicated by:
• switching on of the Alarm light
• sounding of buzzer.
During the alarm phase, the buzzer can
be switched off by pressing the Alarm re-
set switch.
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored the
Alarm light will switch off automatically.
1 2 3 4
29