Changing The Hygienic Blow-Out Filter - Dirt Devil M 8020 R1 Antiinfective R1 Bedienungsanleitung

4 Maintenance
4.4 Changing the hygienic
blow-out filter
32
1. Switch the appliance off and observe the instructions
under
power cable".
2. Open the blow-out filter cover. To do this, press the
release (Fig. 26/1) and lift up the blow-out filter cover.
1
Fig.26
3. Remove the blow-out filter at the grip-tongue provided
for this purpose (Fig. 27).
4. Insert a new blow-out filter (Order Number,
"Spare parts"). Make sure that the grip-tongue is
forwards and pointing up and that it clicks into place
correctly.
5. Then put the blow-out filter cover back again. First hook
the blow-out filter cover from behind and then press it
Fig.27
forwards and down until it clicks into place audibly and
noticeably.
Chapter 3.2, "Switching off and retracting the
Chapter 8,