Disposal; Declaration Of Conformity; Technical Details - tepro Billings Bedienungsanleitung

t
This brushed finish is achieved by running
stainless steel sheets through a process
in which the mirror finish of the steel is
removed and thus the sheets leave the
processing plant in a brushed condition.
Brushed stainless steel requires regular
cleaning and maintenance in order to
preserve its appearance.
Without proper care, it is inevitable that
signs of rust or corrosion will appear on
the steel after some time.
Stainless steel is not a maintenance-
free material. cleanliness and stainless
steel are closely interlinked.
After assembling
recommended that the user apply a thin
film of olive oil with a clean cloth on
all accessible surfaces with stainless
steel.
The olive oil should be a polished in
afterwards and then wiped off with another
clean cloth for a non-oily finish. This
procedure serves to protect the material
from dirt and other corrosive contaminants
by applying
protective shield.
The film of olive oil also serves to facilitate
subsequent polishing, as well as the
removal of fingerprints and the like.
Repeat this process from time to time
when cleaning your BBQ.
19
P170052-TEPRO-1043-Billings-20170818_DE_GB.indb 19
the BBQ, it
a temporary food-safe

Disposal

The packaging is made from
environmentally friendly materials,
which you can dispose of at your
local recycling points.
Do not under any circumstance
dispose of the BBQ in normal
household waste! Dispose of it at
an approved disposal business
or at your community disposal
facility. Respect the currently valid
regulations. If in doubt, get in
touch with your disposal facility.
is

Declaration of conformity

This product is in compliance with
the applicable European and national
Directives (DIN EN 1860-1).

Technical details

Product:
Weight:
Overall dimension,
BBQ assembled: approx.ca. 41 x 35 x
Grill surface:
Max. amount of
fuel:
Item No. 1043,
Stainless Steel BBQ
"Billings"
approx. 4.5 kg
44,5 cm (WxDxH)
2 x approx. 34 x 22 cm
max. 2 x 0.5 kg
18/8/2017 3:16 PM