Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX-controlled operation
You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED CLS-18 QCL RGBW 18x8W will respond to the controller.
Please, be sure that you don't have any overlapping channels in order to control each LED CLS-18 QCL
RGBW 18x8W correctly and independently from any other fixture on the DMX-chain. If several LED CLS-18
QCL RGBW 18x8W are addressed similarly, they will work synchronically.
The device has 4 DMX-modes.
If you set, for example, the address to channel 7, the device will use the channel 7 to 12 for control.
Controlling:
After having addressed the LED CLS-18 QCL RGBW 18x8W, you may now start operating it via your lighting
controller.
Note: It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order
to ensure proper transmission on the DMX data link.
DMX-protocol
4-channel mode
Channel:
Value:
1
000 – 255
Channel:
Value:
2
000 – 255
Channel:
Value:
3
000 – 255
Channel:
Value:
4
000 – 255
6-channel mode (default setting)
Channel:
Value:
1
000 – 255
Channel:
Value:
2
000 – 255
Channel:
Value:
3
000 – 255
Channel:
Value:
4
000 – 255
Channel:
Value:
5
000 – 255
Channel:
Value:
000 – 000
001 – 005
6
006 – 010
011 – 255
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
White (0 – 100%)
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
White (0 – 100%)
Function:
Dimmer (0 – 100%)
Function:
No function
Sound Control (15 colors)
No function
Strobe (increasing)
24/27
00058967.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
