Ordering Replacement Parts; Disposal And Recycling - Matrix EDH-1600-15 Profi Originalbetriebsanleitung

Changing the oil: The oil should be changed after
around 40-50 hours of use.
Recommended oil: 25ml SAE 15W/40 or an
alternative of the same quality.
8.3.2 Oil change (B 8)
Switch off the machine and pull the mains plug
out of the socket.
Undo the hexagonal head screw with the
inspection window (6) using the wrench (7) and
drain the oil. To prevent the oil from running
out in an uncontrolled manner, hold a small
metal chute under the opening and collect the
oil in a vessel until it has fully drained out of the
machine.
Important: The waste oil must be disposed of
in the appropriate collection point for waste
oil.
Add new oil (approx. 25 ml) through the oil filler
opening (6) until the oil level reaches the required
level. Tighten the hexagonal screw again.
Re-check the oil level after a short period of
operation.

8.4 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
• Type of machine
• Article number of the machine

9. Disposal and recycling

The unit is supplied in packaging to
prevent its being damaged in transit.
This packaging is raw material
and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local
council.
32