Fault/Remedy - ADE WS 1600 Bedienungsanleitung

Fault/Remedy

Fault
The DCF77 signal for the
time cannot be received.
The temperature
information of the sensor
seems too high.
Instead of showing the
measured values for
temperature or humidity,
the display shows H.HH or
LL.L.
In the OUT region of the
display, no values are
shown..
The temperature indicator
is blinking on the display.
72
Weather Station with Wireless Outdoor Sensor WS 1600
Possible Cause
‚ Check the chosen
location.
‚ Start the signal
reception manually, if
necessary.
‚ Adjust the time
manually.
‚ Check whether the
sensor has been
exposed to direct
sunlight.
‚ The values lie
above or below the
measurement range.
‚ Press and hold
order to start wireless
reception to the outdoor
sensor manually.
‚ The temperature alert
has triggered. Press
on ALERT as often
as needed until the
blinking stops.
in