Sharp XL-3000H Bedienungsanleitung Seite 95

„ To automatically play the traffic information
(EON-TI)
When the traffic information is broadcast, the radio switches to it
automatically.
1
Tune in to an RDS station (when a station name is dis-
played).
2
Press the EON button when "EON" appears.
z "PTY TI" will flash for about 4 seconds.
z If the EON button is pressed when "EON" is not displayed,
"NO EON" will appear for 4 seconds to indicate that the unit
cannot enter the EON stand-by mode.
3
Whilst they are displayed, select the TI (Traffic Informa-
tion) by pressing the PRESET (
4
5
6
or ) button.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. ("TI"
"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4
seconds, press it again. ("TI" will go out.)
Within 4 seconds, press the PTY.TI button.
z "TI" and "WAITING" will appear for 2 seconds each.
z "TI" will appear, and the unit will enter the EON-TI stand-by
mode.
When a TA specified starts on an ON (other network)
station, the unit will automatically switch to that sta-
tion, and "TI" will flash.
When the traffic information is over, the unit will auto-
matically return to the original station.
ENGLISH
E-25