Sharp XL-3000H Bedienungsanleitung Seite 94

Using the Radio Data System (RDS) (continued)
„ To automatically play the desired pro-
gramme (EON-PTY)
When the desired type of programme is broadcast, the radio
switches to it automatically.
1
Tune in to an RDS station (when a station name is dis-
played).
2
Press the EON button when "EON" appears.
z "PTY TI" will flash for about 4 seconds.
z If the EON button is pressed when "EON" is not displayed,
"NO EON" will appear for 4 seconds to indicate that the unit
cannot enter the EON stand-by mode.
3
Whilst they are displayed, select the desired pro-
gramme type by pressing the PRESET (
The selected programme type will flash.
ENGLISH
E-24
4
Within 4 seconds, press the PTY.TI button.
z The selected programme type and "WAITING" will be dis-
played for 2 seconds each.
z "PTY" will appear, and the unit will enter the EON-PTY
stand-by mode.
5
When the specified programme starts on an ON (other
network) station, the unit will automatically switch to
the station and "PTY" will flash.
6
or ) button.
When the programme is over, the unit will automatically
return to the original station.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. ("Pro-
gramme type"
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4
seconds, press it again. ("PTY" will go out.)
"WAITING")