Sensitivity Setup - Carson 500507055 Betriebsanleitung

4. Expert Mode reverse setup
Hold down the nick/roll stick for 1 second to enter the
setting status. Press the throttle trim key up or down to
choose reverse. And then hold down the nick/roll stick for
1 second to confirm and exit.
f. Sensitivity Setup
1. Tail rotor (rudder) sensitivity setup NOR
(normal) mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press throttle/tail rotor key until the three-point dotted line symbol
starts to flash (see picture beside). Press rudder (tail rotor) trim to set
the sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
2. Nick sensitivity – NOR (normal) mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press throttle/rudder (tail rotor) key until the three-point dotted line
symbol starts to flash (see picture beside). Press nick trim to set the
sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
3. Aileron sensitivity setup – NOR (normal)
mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press the throttle/tail rotor key until the three-point dotted line
symbol starts to flash (see picture beside). Press roll trim to set the
sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
4. Tail rotor (rudder) sensitivity – Expert mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press the throttle/rudder key until the five-point dotted line symbol
starts to flash (see picture beside). Press tail rotor trim to set the
sensitivity and then hold down the nick/roll stick for 1 second to
confirm and exit.
T
X
M1
Flashing
Flashing
CARSON Airbeast Pro 380 • 500507055
M2
Expert
GB
Flashing
Flashing
29