Single-Frame Erase; All-Frame Erase; Formatting (Card Setup) - Olympus Camedia C-5060 Einfache Anleitung

basic_e_x191_6.fm Page 42 Thursday, August 28, 2003 12:44 PM

Single-frame erase

1
Set the mode dial to q and turn the camera on.
• The monitor turns on.
2
Use the arrow pad or control dial to display the picture
you want to erase.
3
Press S.
• The S ERASE screen is displayed.
4
Press ac to select YES, then press e.
• The picture is erased and the menu is closed.

All-frame erase

1
In the top menu, select MODE MENU → CARD → CARD
En
SETUP, and press d.
2
Press ac to select S ALL ERASE, then press e.
3
Press ac to select YES, then press e.
• All the pictures are erased.

FORMATTING (CARD SETUP)

This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
• All data stored on the card, including protected pictures, is erased
when the card is formatted. When formatting a used card, confirm
Note
there are no pictures that you still want to keep on the card.
1
In the top menu, select MODE MENU → CARD → CARD
SETUP, and press d.
• P A S M r n m l k j i
The I FORMAT screen is displayed.
• q
The CARD SETUP screen is displayed.
42 En