Maximum XO-4200 Hybrid Gebrauchsanleitung Seite 21

Step 4C2 Cable search
Standard search
Manuel cable search
- Frequency:
- Symbol rate:
- Constellation:
- Network search:
- Search range:
- LCN:
When Standard is the receiver will start searching for channels. The search
can be aborted by pressing MENU
The receiver will perform a standard
search.
By selecting Standard the receiver will
start performing a standard search. The
search can be aborted by pressing
MENU.
Note! It is not all operators that support
LCN.
Type in frequency in MHz
Type in symbol rate in kbps
Chose QAM number
operators offer to search their entire network.
If you wish to do that then select ON
All channels, Free channels, Scrambled
channels.
Logical Channel Number. It is recommend
turning on this setting as this function make
makes sure that you channels automatically
will be sorted in a reasonable order and not
by frequency.
19
ENGLISH