Options And Settings; Digital Radio Settings; Fm Radio Settings - PURE Evoke D6 Bedienungsanleitung

Options and settings

Digital radio settings

Autotune
You can use the autotune function to automatically scan for new digital radio stations and remove
inactive ones.
Note: Autotune is only available when you have selected 'Digital radio' as the radio source.
To carry out an autotune:
1. Press Menu.
2. Turn and press the Select dial to choose 'Autotune'. The number of stations found will be
displayed during the autotune.
When the autotune has finished, Evoke will tune to the last station that you were listening to. If the last
station you were listening to is no longer available, Evoke will tune into the first station in the alphabetical list.

FM radio settings

FM stereo option
You can choose between 'Stereo' or 'Mono' reception when listening to FM radio. Mono may improve
clarity where stereo signals are weak.
Note: The FM stereo option is only available when you have selected 'FM radio' as the radio source.
To change between Stereo or Mono reception:
1. Press Menu.
Turn and press the Select dial to choose 'FM stereo'.
2.
Turn and press the Select dial to choose between 'Stereo' or 'Mono' FM reception.
3.
FM tuning mode
Note: The FM tuning mode option is only available when you have selected 'FM radio' as the radio
source.
Press Menu and turn and press the Select dial to choose 'FM tuning mode'. Choose from the following
two modes:
Seek
When you turn the Select dial, the radio tunes to the next station with a good signal.
Manual
When you turn the Select dial, the radio tunes up or down the FM radio frequency range by 0.05 MHz.
14