Installation / Fitting - BOMANN EBK 964 Bedienungsanleitung

Control panel
Scope of delivery
4 x mounting clips 4 x cross-head screws
Description of the functions
Overheating protection
A temperature sensor monitors the inside of the appliance. If the maximum temperature is exceeded, the appliance is automatically shut off to prevent
damage.
Residual heat display
After shutting off the appliance, the display of the respective cooking zones shows the symbol "H" (Residual heat). This gives a warning not to touch
the zone.
WARNING: Risk of burning!
Do not touch the cooking zones as long as the residual heat indicator is on.
NOTE:
After having switched off the heating power, you may use the residual heat for different purposes, such as heating up or keeping food warm without
having to switch on the heating power.
Automatic switch-off
The automatic switch-off is a protective function for your appliance. If a stovetop is in operation for a long period and if you do not enter anything on the
control panel, the automatic switch-off will be activated. For the standard times of the different power settings, please refer to the following table:
Power setting
Shut-off time (hours)
Child lock
The appliance is equipped with a child lock to prevent children from turning on the appliance accidentally.
CAUTION:
• The stovetop has to be installed so that the heat can be dissipated. Air intake and outlet may not be blocked.
• The worktop, back walls, veneers, laminates, and adhesives used must be sufficiently heat-resistant (up to 100°C).
Conditions for the installation location
• The appliance may only be installed on one side next to higher kitchen furniture, appliances, or walls.
• The appliance should not be installed directly next to refrigerators or freezers. Due to the heat dissipation, the energy consumption of the cooling
appliances will increase unnecessarily.
• At least 5 cm free space must remain under the entire cut-out for the appliance. Heat-sensitive objects (base cabinet, drawer, etc.) may not be
located in this area. Possibly existing side-walls or drawer cabinets must be cut out, or disassembled accordingly.
• When installing the device, ensure sufficient air circulation "Fig. 1".
14 14
1 2 3
8 8 8

Installation / Fitting

1 On/off-button
2 Power / timer control
3 Cooking zone selection buttons
4
Timer (Timer switch)
5 Child lock
4 5 6
4 4 4
7 8 9
2 2 2