Waste Disposal - Kathrein CAS 90gr Handbuch

Dimensions in mm
max.
Warranty Conditions for the Antenna Corrosion Resistance
Important instructions relating to the warranty conditions for the corrosion resistance of Kathrein offset parabolic antennas:
● The antenna must be assembled and mounted professionally, following the steps described
in the enclosed instruction sheet.
● The antenna must not be modified (e.g. by drilling).
● The antenna must not be damaged mechanically (e.g. deformation, deep or extensive damage,
or abrasion of the powder coating and surface coating).
● The antenna must not be damaged due to exposure to chemicals (e.g. solvents, lacquers,
detergents or the like).
● Only genuine Kathrein accessories may be used for the antenna.
These warranty conditions are effective from the date of purchase.
Only the original sales slip is acceptable as proof of purchase for warranty claims.
Furthermore, corrosion resistan
frequently occurring, abrasive weather conditions may wear off the protective coating within a short
used in regions where
period of time (e.g. sandstorms).

Waste Disposal

Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIA-
MENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment, it must be disposed of
properly.
At the end of its service life, take this unit for disposal to an appropriate official collection point.
www.kathrein.com | sat@kathrein.de
KATHREIN-Werke KG, Anton-Kathrein-Straße 1-3, 83022 Rosenheim, Germany, Phone +49 8031 184-0, Fax +49 8031 184-52360
ce is not warranted for the consequences of force majeure, e.g. lightning strike, or if the antenna is
936.4018/d/PSC/0716/GB | Subject to change.