Herunterladen Inhalt Inhalt Diese Seite drucken

Interconnection Example: Link-Mode - Hifonics X3-ATLAS Bedienungsanleitung

Soundsystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INTERCONNECTION EXAMPLE: 2 Amplifiers (X3-Models) in Link-Mode
Remote wire REM
X3-AMPLIFIER 1
Switch position = MASTER
1.
EXTENDED BASS CONTROL
LINE INPUT
L
SUB BOOST
Q-CONTROL
FREQ RANGE
X-OVER MODE
OPERATION MODE
R
FULL
LP
MASTER
BALANCED INPUT
Remote wire REM
REM
BATT +12V
ATLAS
1 x 600 W/4Ω
1 x 1100 W/2Ω
1 x 1750 W/1Ω
FUSE
Subwoofer
1 – 8 Ohms
LINK-MODE
Unlike the GENERATION X3 MASTER/SLAVE Mode this interconnection example works also with other HIFONICS X3-AMPLIFIERS.
This interlinking is continuously expandable with additional amplifiers (Daisy Chaining).
LINE OUT SIGNAL
The provided audiosignal on the LINE OUTPUTS is a linear unmodified fullrange signal, which is suitable to trigger any additional amplifier.
REMOTE-BRIDGE
But to use the REMOTE BRIDGE function, you need to interlink two HIFONICS X3-AMPLIFIERS with eachother. This means the BASS
REMOTE controller must be connected on X3-AMPLIFIER 1 (REMOTE IN). Then use the enclosed REMOTE-LINK-CABLE and interlink
the X3-AMPLIFIER 1 (REMOTE OUT) with X3-AMPLIFIER 2 (REMOTE IN). Now you are able to control both amplifiers with just one
bass remote controller.
SETTINGS
All settings like LEVEL, LOW PASS, SUBSONIC, PHASE SHIFT and EXTENDED BASS CONTROL must be adjusted on each amplifier
separately. Attend therefor the descriptions on page 20.
X3-ATLAS / X3-CRONOS
Connect the bass remote controller
and the remote terminal on the
MASTER amplifier (REMOTE IN)
with the enclosed cable .
MASTER OUTPUT
POWER
SLAVE INPUT
LINE OUTPUT
PROTECT
L
PHASE SHIFT
SUB SONIC
LOW PASS
R
SLAVE
LEVEL
REMOTE IN
REMOTE OUT
Use the enclosed Link-Cable to bridge the Remote Ports.
GND
SPEAKER OUTPUT
LOGO
BADGE
PROTECT
BRIDGE
BLUE
WHITE
e
13
SLAVE MODE
021215
SUBWOOFER
POWER INPUT
1. Connect Stereo RCA output (L/R or SUB OUT)
of the headunit with the LINE INPUT L/R of the
MASTER amp
2. Connect Stereo RCA output (LINE OUTPUT)
of the MASTER amp with the LINE INPUT of the
SLAVE amp
X3-AMPLIFIER 2
For example X3-ZEUS in STEREO-MODE
LINE INPUT
STEREO
L
MONO
2.
SUBSONIC
LOW PASS
R
BALANCED INPUT
Remote wire REM
REM
ZEUS
2 x 350 W/4Ω
2 x 600 W/2Ω
2 x 750 W/1Ω
FUSE
Kickbass
1 – 8 Ohms
23
X-OVER MODE
POWER
LINE OUTPUT
12dB
PROTECT
24dB
HIGH PASS
LEVEL
BASS BOOST
VICE VERSA
LINE OUTPUT SIGNAL
REMOTE IN
REMOTE OUT
BATT +12V
GND
SPEAKER OUTPUT
LOGO BADGE
BLUE
WHITE
LCH
RCH
e
13
MONO BRIDGED
021224
POWER INPUT
Kickbass
1 – 8 Ohms

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

X3-cronos

Inhaltsverzeichnis