Herunterladen Inhalt Inhalt Diese Seite drucken

Omnitronic VFM 208AP Bedienungsanleitung Seite 20

Vorschau ausblenden Andere Handbücher für VFM 208AP:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1
Audio player
Allows playback of audio files from USB devices, SD (HC) cards or mobile devices via Bluetooth.
For models 208AP, 210AP, 212AP and 215AP only.
2
Microphone inputs MIC 1 and MIC 2
XLR and 6.3 mm jack inputs for connecting microphones. Volume control is via the corresponding
MIC LEVEL control.
Models 208AP and 210AP only have one combo microphone input.
3
Level control LINE/MP3 LEVEL
To mix the signal of the line input or the audio player to the master signal.
Input selector switch LINE/MP3
4
Switches between line input and audio player for the master signal.
• Button not pressed: signal of the jacks LINE INPUT or AUX INPUT
• Button pressed: signal of the audio player
5
Jacks LINE INPUT and AUX INPUT (w/o illustration)
RCA input for connecting audio units with line level output (e.g. mixer, CD player).
Models 208A/AP and 210A/AP feature an additional 3.5 mm AUX input.
6
Jacks LINE OUTPUT
RCA output of the master signal of all input sources for connection to a line input of a mixer, amplifier
or a further active speaker.
7
Level control MASTER LEVEL
Adjusts the volume of the main mix.
8
Tone controls HI and LOW
Adjusts high and low frequencies of the master signal.
9
POWER indicator
Lights up when the device is turned on.
10 CLIP indicator
Lights red in case of overload. Reduce the volume with the master control until the LED does not
light anymore, or only at signal peaks.
11 Power switch
Turns the device on and off.
12 Power supply
Used to plug in the supplied power chord.
13 Fuse
Only replace the fuse when the device is disconnected from mains. Only use fuses of the same
rating and power. The correct fuse value is specified on the rear panel.
14 LCD display
Indicates audio source, replay mode, elapsed time and information for the title.
15 Infrared sensor for the remote control
16 Audio player operating buttons
[MODE]: For switching between the data carriers USB and SD and Bluetooth operation.
[►II]: For switching between play and pause.
[ ]: Stops the playback.
[
]: For selecting random play and repeat functions.
[ ] and [ ]: For title selection (short actuation) and fast forward/reverse (long actuation).
17 Memory card slot
Allows playback of audio files from an SD (HC) card.
18 USB port
Allows playback of audio files from a USB storage device.
20

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis