Disposal; Disposing Of The Machine; Disposing Of The Packaging; Malfunctions And Troubleshooting - CMi 236552 Gebrauchsanweisung

Tauchpumpe_C-TP_250.book Seite 34 Freitag, 5. September 2008 5:16 17

Disposal

Risk of machine damage!
GB
Frost destroys machine and accessories as these always contain water!
Attention!
Disposal

Disposing of the machine

This machine must not be disposed of with regular household waste! Dispose of the machine in
the appropriate manner. For more information, consult your community waste disposal service.

Disposing of the packaging

The packaging used for this machine consists of cardboard and correspondingly marked foils
that can be recycled.
– Make these materials available for recycling.

Malfunctions and troubleshooting

In the event of a malfunction...

Danger of physical injury and death!
Improperly conducted repairs may prevent your machine from working safely. Such
repairs will endanger you and your surroundings.
Danger!
Minor faults are often enough to cause a malfunction. In most cases, you will be able to correct
these faults without a problem. Please start by referring to the following table before contacting
our technical support. This will help you save much effort and cost.
Fault/malfunction
Pump does not run.
34
Cause
No mains voltage?
Float switch does not opera-
te?
Motor overheats due to:
• liquid temperature too
high?
• blocking by foreign
bodies?
Residual current circuit brea-
ker (RCCB) triggered?
Motor defective?
236552 V_01/09/2008
Remedy
Check cables, plug, socket and fuse.
Ensure there is sufficient liquid pre-
sent.
Ensure that the float switch can mo-
ve sufficiently.
Eliminate the cause of the overhea-
ting (max. liquid temperature
☞ Technical specifications –
page 36).
Activate RCCB.
Contact qualified electrician if RCCB
triggers again.
Contact service partner.