Epson EasyMP EMP-745 Installationshandbuch Seite 36

4
Ensure that the "Config" button at the lower right of the window is
selected, and press the [Enter] button.
5
For a wireless LAN
Tilt the [ ] button down to move the cursor to the "Wireless LAN" -
"Basic" button, and then press the [Enter] button.
For a wired LAN
Check that the "Wired LAN" - "Basic" button is selected, and then press
the [Enter] button.
6
Wireless LAN only
Position the cursor on "Access point mode", and press the [Enter] button.
This selects "Access point mode".
35