If Using A Macintosh - Epson EasyMP EMP-745 Installationshandbuch

If Using a Macintosh

The following describes how to set the port to be used for the connection.
Refer to the documentation for the computer and the AirPort card for details on port
settings (network settings).
Procedure
1
Select "System Preferences" - "Network" from the Apple menu.
The network setting window will be displayed.
2
Select a single port to use in the "Port Configurations" box, and then
click "Apply Now".
Select a single port to use.
Tip :
If you set the "Location", you can select a target location and change all network
settings at the same time.
31