Using A Peak Hold Function - Pioneer AVG-VDP1 Bedienungsanleitung

Basic Operations
5 Touch ESC to return to the normal dis-
play of each mode.
# To return to the previous display, touch
Back.

Using a peak hold function

With this unit, the peak hold value will be auto-
matically stored in memory. And you can re-
call the maximum value reached for each
parameter in memory.
! This function can be operated when select-
ing the analog and the digital modes.
1 Touch Peak Hold.
The maximum value reached for each para-
meter will be displayed.
# When Peak Hold is not displayed, you can
display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
The touch panel keys appear in the display.
# To reset the peak hold value, touch Reset.
# To hide the touch panel keys, touch HideKey.
3 Touch ESC to return to the normal dis-
play of each mode.
# To return to the previous display, touch Back.
Note
In the analog mode, you can also change the
combination of gauges by touching i/j/k/
l.
Section
03
13
En