Selecting Gauges - Pioneer AVG-VDP1 Bedienungsanleitung

Section
03 Basic Operations
6 Compass
Shows the direction your vehicle is travel-
ling.
7 Longitude and latitude (LON./LAT.)
Shows the longitude and latitude of the cur-
rent location of your vehicle.
8 Speedometer (SPEED)
Shows your vehicle speed.
Vehicle status mode
1
You can customize the graph and the back-
ground.
! To customize the graph, refer to Customiz-
ing the graph on page 17.
! To select the background, refer to Selecting
the background display on page 14.
1 Graph
Shows the graph of speed vs time.
2 Time (TIME)
Shows the current time.
3 Speedometer (SPEED)
Shows your vehicle speed.
4 Tachometer (TACH)
Shows the engine speed in revolutions per
minute (rpm).
12
En
5 Acceleration (ACC.G)

Selecting gauges

You can change the combination of gauges.
! This function can be operated only when
1
2
3
The touch panel keys for selecting the gauges
are displayed.
# When Select Gauge is not displayed, you can
display it by touching the screen.
2
want to change.
The cursor moves to the selected gauge.
4 5
3
Each time you touch i or j selects the
gauge types in the following order:
TACH (tachometer)BATT. (voltmeter)
ACC.G (accelerometer)LAT.G (lateral ac-
celerometer)POWER (horsepower meter)
TORQUE (torque meter)tiltmeterSPEED
(speedometer)
4
sition of the gauges.
Shows the acceleration in a forward direc-
tion. The + sign indicates acceleration
while the  sign indicates deceleration
(braking).
selecting the analog mode.
Touch Select Gauge.
Touch the middle of a gauge that you
Touch i or j to select the gauge type.
Touch k or l to switch among the po-