Philips Avent SCF875/02 Benutzerhandbuch Seite 14

ENGLISH
16
Blending without steaming
This appliance is intended for the following purposes.
- Pureeing steamed and cooked ingredients
- Blending fluids and fruits
Caution
• The appliance is not intended for cutting hard ingredients such as ice cubes
and sugar cubes or sticky ingredients like cheese.
• If you have added liquids to the jar, never put the jar in the steam position, as
the liquid will go through the sieve.
Note
• When blending ingredients with fluids, make sure you do not fill the jar past
the MAX fill level indicated on the jar.
• Do not fill past the top edge of the plastic part of blade unit when adding ingredients.
• Never put the jar with blended food inside in the steaming position on the
main unit.
• If the ingredients stick to the wall of the jar, or if the blended ingredients are
still too solid, release the blending button, remove the jar from the main unit,
and loosen the ingredients with the spatula or add some liquid (e.g. drinking
water) until the blended food has the right consistency for your baby's age.
When adding liquid in the jar, do not fill the jar past the MAX fill level indicated
on the jar.
• Make sure that the blended baby food has the right consistency before you
serve it. For guidance on what food consistencies are appropriate for different
ages, refer to the professional weaning advice that comes with this appliance,
or seek advice from a doctor or consultant.
• Do not process large quantities of solid ingredients at the same time. Process
these ingredients in a series of small batches to get a finer texture.
1
Put the blade unit on the blade unit holder in the jar (Fig. i).
2
Cut solid ingredients into small pieces (cubes not bigger than 1 cm) before
you put them in the jar.
3
Put the ingredients in the jar (Fig. j).
4
Press the sieve into the jar lid (Fig. k).
5
Place the lid on the jar and turn it clockwise to close it securely (Fig. l).
Note
• The jar has grooves that help smoothly guide the locking pins and lock the lid
in place. Make sure that the lid tab slides into the handle of the jar (Fig. m).
6
Place the jar on the main unit with the lid on the top, align the
jar with the icon on the main unit, and turn the jar clockwise to securely
lock it in place on the main unit (Fig. t). Make sure the handle is on the
right-hand side.
icon on the