Headphone; System Status Indicator - Philips SBC HD1500U Bedienungsanleitung

ENGLISH 25
# CHANNEL
Select one of the 4 available transmission channels for optimal reception
quality.
$ ~ MAINS
AC power connector for AC mains cable

Headphone

% POWER
– Power on the headphone by pushing the Power button.
– Power status is indicated by SYSTEM STATUS light
^ TUNE
Automatic transmission channel search by pushing the button
& SYSTEM STATUS indicator
The SYSTEM STATUS indicator on the control panel will indicate the status
of the headphone by means of different colors and different blinking modes.
Some of these modes also have an audible alarm.
RED on – Power on but no radio signal
Suggested action: Press tuning button on headphone or change transmission
channel on base station or switch on transmission function on base station
GREEN on – Power on and tuned
GREEN blinking – tuning / searching
RED blinking + series of (5 x 50ms) beeps – Battery running low
• You have a limited time to replace batteries before the headphone will
go in power save mode