Navigating In The Offline Menu; Modifying The Language Setting - Phoenix Contact UM IA THERMOMARK X1.1 Handbuch

THERMOMARK X1.1
Figure 3-2 Navigator pad
3-2
PHOENIX CONTACT
3.1.1

Navigating in the Offline Menu

All settings and functions in the offline menu can be controlled with the navigator pad.
Press the menu button to switch from the Ready state to the offline menu.
Press the or button to select menu items at menu level or to select values at
parameter level.
Press the button at the top menu level several times, if necessary, to switch from the
offline menu to the Ready state.
Press the or button to access a higher or lower menu level or to set values at
parameter level.
Press the ↵ button briefly to enable value selection at parameter level, to apply a selected
value or to start a function.
Press and hold down (> 2 s) the ↵ button to exit parameter level without applying the
parameter setting.
3.2

Modifying the Language Setting

The display language is set to English (UK) by default. To select a different language,
proceed as follows:
• Press the menu button.
• Press the button until you access the Setup
• Press to confirm your selection.
• Press the button until you access the Local Settings
• Press to confirm your selection.
• Press the button until you access the Country
• Press to confirm your selection.
• Press the buttons to select the required language.
Press ↵ to confirm your selection.
•
Use the button to return to the higher menu level.
At the top menu level, press
state.
several times to switch from the offline menu to the Ready
item.
item.
item.
103180_00_ia