Ideen Welt P8-RM-SBC Bedienungsanleitung Seite 24

12. Only pour the coffee into the desired container using the spout.
13. Place the glass jug
to keep the coffee warm. Otherwise, press the ON/OFF button
appliance must be switched off at the latest when the glass jug
14. Disconnect the mains plug from the mains electricity.
15. Once the heating plate has cooled down, clean all of the parts as described in the "CLEANING,
CARE AND STORAGE" section.
Note:
▪
Hold the glass jug
can be read correctly.
▪
This appliance is equipped with an automatic switch-off function. The appliance will switch off
automatically after it has kept the contents of the glass jug
▪
Pressing the ON/OFF button
resume the brewing process.
▪
Water will be lost when brewing the coffee. Some of the water will evaporate, while a little water will
also be left in the coffee filter. There will thus always be a little less coffee in the glass jug
the brewing process than was added as water at the start.
▪
If the taste of the brewed coffee deteriorates after using the appliance a few times without any other
parameters having changed, it is necessary to descale the appliance as described in the
"DESCALING" section.
CLEANING, CARE AND STORAGE
ATTENTION! Never use alcohol, acetone, benzene or
any other aggressive cleaning agents to clean the plastic
components. Do not use hard brushes or metal objects.
RISK OF DAMAGE TO APPLIANCE! To avoid damaging
them, never clean parts of the appliance in a
dishwasher!
RISK OF ELECTRIC SHOCK AND INJURY! Before the
appliance is cleaned and/or stored, it must not be
switched on or connected to the mains electricity. The
appliance must be completely emptied and dry!
The appliance is maintenance-free.
1. Make sure you have read the safety instructions before cleaning.
2. Remove the glass jug
3. Clean the glass jug
normal household dishes (do not under any circumstances put them in a dishwasher) and dispose
of any used single-use filters where necessary.
4. Use a slightly dampened cloth and, if necessary, a mild cleaning agent for cleaning the housing and
③
the filter holder
Please Note:
The heating plate
and ensure that no objects with (sharp) edges touch the non-stock coating.
5. If using a cleaning agent, clean the housing again afterwards with a damp cloth without any
cleaning agent.
6. Ensure that no water penetrates into the interior of the appliance (with the exception of the water
②
tank ). Never immerse the appliance in water or other liquids while cleaning or operating it and
never hold it under running water.
⑦
back onto the heating plate
⑦
upright when filling with fresh drinking water to ensure that the water gauge
⑨
during the brewing process will interrupt it. Pressing it again will
⑦ ③
, filter holder
⑦
and, if necessary, the permanent filter
.
⑧
has a non-stick coating. Take particular care when cleaning the heating plate
⑧
. Leave the appliance switched on if you want
⑦
and the inserted paper filter or permanent filter
④
G
⑨
to switch off the appliance. The
⑦
is empty.
warm for around 40 minutes.
by washing them by hand like
⑦
after
④
.