Cleaning And Maintenance - Lightmaxx Platinum MINI EXEO XBLIG0009566-000 Bedienungsanleitung

4 Gobo Wheel
5 Bobo Rotation
6 Shutter
7 Focus
8 Prism

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an expert after
every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a skilled
person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not be
corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension, trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any
safety problems have to be removed.
0-9 Open
10-19 gobo 1
20-29 gobo 2
30-39 gobo 3
40-49 gobo 4
50-59 gobo 5
60-69 gobo 6
70-79 gobo 7
gobo 1 shake from slow to fast
80-99
100-119 gobo 2 shake, from slow to fast
120-139 gobo 3 shake, from slow to fast
140-159 gobo 4 shake, from slow to fast
160-179 gobo 5 shake, from slow to fast
180-199 gobo 6 shake, from slow to fast
200-219 gobo 7 shake, from slow to fast
220-255 gobo wheel
speed
0-127 No rotation
128-191 forwards gobo rotation with increasing
speed
192-255 Backwards gobo rotation with increasing
speed
0-9 closed
open
10-19
20-127 Strobe effect 1 with increasing speed
128-137 open
138-201 strobe effect
202-255 open
0-255 Continuous adjustment from far to near
0-3 open
4-127 close
Rotation from fast to slow
128-255
rotation with
2 with increasing speed
17
increasing