User Menu - PEHA PHC Bedienungsanleitung

User menu

9. User menu
The user menu of the MCC is programmed with the „Multi Control Centre" programme. It can be struc-
tured in maximum 11 pages with 31 lines each. In every line of each page, a switching function and a
feedback signal can take place. They are to be programmed in advance within the PHC software.
Feedback signal
Symbols Description
Feedback signal ON / Off
Switch ON / Off
Lamp ON / Off
Continuous operation UP / DOWN
Door contact open / close
Window contact open / close
Note: At the end of the „Return from menu" time, the user menu is ended automatically
if not in use (see point 8.9).
GB - 43
GB