Certificate Of Compliance; Instructions For The User - STP W4 EN 131 Handbuch

This document must always be combined with the product and shall be performed in case of control by law
enforcement agencies.
S.T.P. LTD declares that the ladders "W4 EN131" are built in accordance with UNI EN 131 1/2/3 and,
The tests mandated by the decree of 23.03.2000 have been carried out by:
WARRANTY: The ladders "W4 EN 131" are guaranteed five years against production defects.
The manufacturer disclaims all responsibility if:
- Use of parts and / or components different from the original ones.
- Operation in conditions not provided.
- Poor and / or lack of maintenance.
also
- The warranty automatically expires if it is not possible to trace the date of manufacture.
- The warranty does not apply to parts subject to wear and also those elements changed or repaired by
unauthorized people and so they
aren't the equivalent of original components.
The guarantee is limited to the faulty parts recognized by the manufacturer
The manufacturer disclaims any liability for use of non-original components.
A- ensure that you are fit enough to use a ladder. Certain medical
conditions for medication, alcohol or drug abuse could make the ladder use unsafe;
B- when carrying ladders on roof bars or in a truck , ensure they are
suitably placed to prevent damage;
C- inspect the ladder after delivery and before first use to confirm
condition and operation of all parts;
D- visually check the ladder is not damaged and is safe to use at the
start of each working day when the ladder is to be used;
E- for professional users regular periodic inspection is required;
F- ensure the ladder is suitable for the task:
G- do not use a damaged ladder;
H- remove any contamination from the ladder, such as wet paint, mud,
I- before using a ladder at work a risk assessment should be carried out respecting the legislation in the
country of use.
1- The correct angle for a leaning ladder (angle of inclination approximately 1:4) with the rungs or treads level
and complete opening of a standing ladders;
2- Ladder should rest on a uniform and firm surface;
3- Leaning ladder should lean against a flat non-fragile surface and should be secured before use, e.g. tied or
use of a suitable stability device;
4- The ladder should never be repositioned stationed above;
5- When positioning the ladder take into account risk of collision with the ladder e.g. from pedestrians,
vehicles or doors. Secure doors (not fire exists) and windows where possible in the work area;

CERTIFICATE OF COMPLIANCE

therefore, in compliance with Legislative Decree no. 81/08 Art.113.
STATE POLYTECHNIC OF MILAN issuing certificates:
"LADDER TYPE W4 EN 131 M. 3.00 N° 2011/3011"

INSTRUCTIONS FOR THE USER

POSITIONING AND ERECTING THE LADDER
USER'S MANUAL
BEFORE USE
oil or snow;