Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Rotation-speed:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Type of LEDs:
Number of LEDs:
Dimensions (LxWxH):
Weight:
Accessory:
Saveking Safety bond 3x600 black
Please note: Every information is subject to change without prior notice. 31.05.2012 ©
230 V AC, 50 Hz ~
15 W / 35 VA
6 - 35 RPM
:
45° C
a
(steady state):
50° C
C
0.5 m
0.5 m
T 1 A, 250 V
TCL
4
560 x 205 x 290 mm
4.5 kg
No:.
58010252
17/17
00063701.DOC, Version 2.1
Werbung
Inhaltsverzeichnis
