Additional Limit Switches - GF EA 21 Bedienungsanleitung

7.3 Additional Limit Switches

Description
Kit with 2 additional*
limit switches Ag-Ni
Kit with 2 additional*
limit switches Au
Kit with 2 additional
limit switches NPN
Kit with 2 additional
limit switches PNP
Mounting set for 4 limit
switches
* The switches are wired as openers according to the dia-
gram. It is possible for the customer to convert to closer by
rewiring.
(Terminal 8 > 7 and terminal 10 > 9).
Mounting the limit switches
1. Disconnect the actuator from the supply voltage.
2. Remove the screws from the limit switches S1 and S2.
3. Mount the limit switch kit (1) on S1 and S2 as shown.
4. Tighten with the new, longer screws.
5. Mount the additional switching cams (2) as well as the
spacer rings (3).
2
3
Technical Code
data
250 V ~, 6 A 199 190 092
30 V =, 100 mA 199 190 093
10-30 V=, 199 190 096
100 mA
10-30 V=, 199 190 095
100 mA
199 190 097
1
Wiring diagram
B)
B)
49