Installation - Topcom orfeo 1500 Bedienungsanleitung

1. Installation

• Connect one end of the line cord to the telephone line wall socket and the
other end into connector 1.
• Plug one end of the adapter into the electric socket and the other end into
connector 2.
• The actual setting will be announced.
Important: Never use another adapter than the one supplied together
with the unit.
Note: All messages and settings are stored on Flash-Memory and will
not be erased when the adapter is unplugged. Only the time settings
(clock) will be erased.
2. Keys
1. Skip Back
2. Mailbox 1
3. Volume Up
4. Volume Down
5. Delete
6. Answer ON/OFF
3. Settings
Two outgoing messages of 3 minutes can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and the possibility for
callers to leave a message.
• Outgoing message 2 for the answering function without allowing callers to
leave a messages on the machine (answer only).
If no outgoing message is recorded, a pre-recorded outgoing message
will be used.
3.1. Setting the speaker volume
To change the volume during playback of incoming or outgoing messages.
Press to increase or
3.2. Activating message alert.
When Message Alert is on, you will hear a beep tone when you have received
a new message. To active message alert:
• Press for 2 second
• You will hear 'Message alert On'
• Press again for 2 seconds to deactive the setting.
• You will hear 'Message alert Off'
7. Memo
8. Play
9. Mailbox 2
10. Skip Forward
11. Stop
to decrease the volume.
3