Led Messages; Error Messages - Yamaha mLAN8E Bedienungsanleitung

LED Messages

LED messages
Indicates if sound from sources other than the
mLAN1–3
device being disconnected is interrupted.
RT/ERR Indicates root and error.
ACTIVE Indicates the status of the relay function.

Error messages

3 2 1 RT
red orange
red orange
red red orange
green orange The number of hops exceeds 16.
green orange The power to the bus is insufficient.
red red
red red
red
Function
Cause
The topology of the connected
devices creates a loop.
Cycle Start Packet is not transmitted
to the bus. (Audio/MIDI data cannot
be transmitted.)
A malfunctioning device exists on the
bus.
MIDI IN transfer rate is not correct.
Data transmission exceeds the MIDI
transfer rate.
The sound is interrupted for some rea-
son, or the devices are not syncing.
Status
Red ... Sound is interrupted.
Green ... Sound is not interrupted. (leaf node)
Red/orange ... An error has occurred.
Green ...
The mLAN8E is a "root."
Blue ... The relay function is enabled.
Action
Check to see if any part of the con-
nection creates a loop.
Remove the malfunctioning device.
Remove the malfunctioning device.
Check the number of hops.
Add a power provider to the bus, or
remove a power consumer from the
bus.
Check the MIDI transfer rate setting.
Check to see if the transmitting
device is operating properly.
Check the word clock setting on the
mLAN8E and the source.
21