Settings On The Device In Which The Mlan8E Is Installed; For The A5000/A4000 - Yamaha mLAN8E Bedienungsanleitung

Settings on the device in which
the mLAN8E is installed

For the A5000/A4000

If the mLAN8E is installed in the A5000/A4000, you will be able to make mLAN-related settings.
mLAN settings are made in Utility mode.
NOTE
mLAN Cnct (mLAN connections)
NOTE
Cursor 1 Out (output)
Knob 1
[ turn] Move cursor / switch pages
Move the cursor or switch pages.
[ press] Tree View
Access the Tree View screen.
Knob 2
[ turn] Out (select output plug)
Select the mLAN plug of the mLAN8E that will be the output source.
Setting: AS (assignable) 1~6, DIG-L, DIG-R, MIDI
10
In order to use mLAN, you must first access the mLAN Configuration page
and set MIDI Input to a setting other than MIDI IN.
mLAN connections tone generators are saved in the mLAN8E. They cannot
be saved on disk.