Connecting The Activy Media Player 150; Video Connections - Living Home ACTIVY Media Player 150 Benutzerhandbuch

6 Connecting the ACTIVY Media Player 150

Before you can use your ACTIVITY Media Player 150, the following connections
must be made:
Video, audio or HDMI
LAN / WLAN
Power supply
After you have made the connections, switch the TV, ACTIVY Media Player 150,
Router and PC / ACTIVY Media Server / ACTIVY Media Center on and
set up the ACTIVITY Media Player 150
share the UPnP server on your PC / ACTIVY Media Server /
ACTIVY Media Center
Connection and setup options can be found in the following sections.

6.1 Video connections

Select one of the following methods for connecting video to the TV:
Note: All audio, video and networking connections are located on the rear
panel of the ACTIVY Media Player 150.
SCART
Plug the SCART cable supplied into the SCART connector on the rear panel of the
ACTIVY Media Player 150 and the other end of the cable into the SCART video-in
connector on the TV.
If your TV is equipped with two SCART connectors, select the SCART connector
with SCART-RGB support for better picture quality.
ACTIVY Media Player 150
11
COM