Pip Picture-In-Picture; Using The Remote Control With Videos - Living Home ACTIVY Media Player 150 Benutzerhandbuch

3. If you wish to 'jump' to a scene by entering
the time (e.g. 14 minutes and 23 second),
use the remote control to enter the time (in
this case 1423) and press OK.
Once you have pressed OK, the video will
'jump' to the time that was entered.
8.4.4 PIP Picture-in-Picture
The ACTIVY Media Player 150 has a PIP mode for video.
In order to use this function, you must activate it. To do this, follow the instruction in
the chapter "Activating the PIP function in the setup menu". See also chapter 9.4.
Select a video file and play it. Once it begins to
play, press BACK or the left arrow button on the
remote control. You should notice that the video
file is still playing, but is now located in the lower
right corner of the screen,
Press REC TV/Picture to return to the video
playing screen.

8.4.5 Using the remote control with videos

OK
PLAY/PAUSE
+
-
MUTE
Fast Forward
Rewind
INFO
Double arrow left
Press OK to play the highlighted video.
To pause the video and resume playing the video
To increase the volume
To reduce the volume
To silence the audio portion of the video
To fast forward through the video
To rewind the video
To view the track length, resolution and bit rate
To play the video again after viewing it
47
ACTIVY Media Player 150
COM