Operation; Commissioning; Microphone Or Instrument Operation; Line Mode - MC Crypt PPA8 Mobile Bedienungsanleitung

Operation

Commissioning

• Turn the LEVEL control (1, 2, 3) and MASTER VOL (5) to minimum (left stop).
• Turn the TREBLE, MIDDLE and BASS controls of the 3 band equalizer (4) to a middle position.
• Switch on the mobile PA system with the POWER switch (8).
• The POWER indicator next to the MASTER VOL (5) control is lit.
• The SOUND SYSTEM BATTERY LEVEL (10) display indicates the charging state of the rechargeable battery:
The more green LEDs are lit, the better the remaining capacity.
If the red LED LOW is lit, the rechargeable battery must be recharged as soon as possible.
• Set a medium volume with the MASTER VOL control (5).

Microphone or Instrument Operation

• Speak into the microphone or play your instrument and set the input sensitivity of the input with the LEVEL control
at the MIC 1 input or INSTRUMENT/MIC 2 input (depending on where your microphone/instrument is connected)
so that the sound is not distorted but as loud as possible.
Do not direct any microphones to the integrated speaker. This can result in acoustic feedback which
will generate a lout whistling sound.

Line mode

• Start playback on your audio source device which is connected to the CD IN socket (3) and set the input sensitivity
of this input with the LEVEL control (12) so that the sound is not distorted but as loud as possible.

USB/SD card mode

Button functions
|| starts or pauses playback
stops playback

V+ increases volume in USB SD card operation
V - decreases volume in USB SD card operation
| playback skips to the last track
| playback skips to the next track
selects the type of repetition function (all titles or only current title)
EQ selects the equalizer setting (there are 9 pre-determined settings E0-E8)
USB/SD selects the storage medium for playback
28