WARNING:
Do not expose the batteries to high temperatures or direct sunlight. Never throw batteries
into the fi re. There is a danger of explosion!
•
Turn the device on by the POWER ON button (1). The POWER control lamp (8) shows
that the radio is working.
•
With the function switch (4) you can select the desired frequency band.
•
Turn the TUNING regulator (2) to the desired station.
•
By turning the VOLUME regulator (3) you can set the desired volume.
•
An aerial is integrated into the device for the reception of stations. If reception is too
weak, try changing the position of the device in order to improve reception.
•
After use, turn the device off again by the POWER OFF button (6). The display indicates
furthermore the current opposed time.
NOTE:
The device can only be switched on if the function switch (4) is in the FM or AM position.
Setting of the Clock (12 h)
Hours:
Press the TIME key (17) and the HOUR key (14) simultaneously.
Minutes:
Press the TIME key (17) and the MIN key (15) simultaneously.
GB
Setting of the Alarm (12 h)
Hours:
Press the ALARM key (11) and the HOUR key (14) simultaneously.
Minutes:
Press the ALARM key (11) and the MIN key (15) simultaneously.
NOTE:
•
The clock/alarm time can only be set in the POWER OFF mode.
•
Press the ALARM button to see the set time in the display.
•
The following appears in the case of the 12 hour display
36
05-DR 747 36
Start-up the device
VHF = FM, medium wave = AM
AM = in the morning, PM = in the afternoon/evening.
04.01.2007, 8:29:38 Uhr