Alde 3010 213 Installationsanleitung Seite 17

14. External start
This function is used, if you want to start the heating
from outside. To use this function it is necessary to have
an installation for external start (see instructions for
1. Press the button with the arrow
until the "Ext" symbol flashes.
The "OFF" text is shown next to
the temperature in the display.
blinkar
flashes
4. Off and Ext are shown in the
display when the panel returns
to standby. External start is
activated.
15. Automatic temperature change
This function is used when you wish to set automatic
temperature change, for example, during the night.
1. Press the button with the arrow
until the symbol for automatic
temperature change flashes.
The temperature and the "OFF"
text are shown on the display.
flashes
blinkar
4. Then press Store and the start
time is displayed. Adjust the
start time (the same procedure
as in 13) and press the "Store"
button.
flashes
blinkar
blinkar
flashes
vehicle, boat or building). To activate external start, first
light up the lower menu row of functions (see item 12).
2. Press the +/On button. The "ON"
text is shown next to the tem-
perature in the display.
flashes blinkar
When external start is activated
the heater will start with the
latest settings and "ON" (main
breaker) comes on. If 12V is
not connected to the heater, the
display will not light up until 12V
is connected. The external start
function is still activated.
Auto
In order to activate automatic temperature change, first
light up the lower row of functions (see item 12).
2. Press the +/On button. Set
flashes and the OFF text is
shown in the display. Press +/On
to activate the function. "ON" is
shown in the display.
Set
flashes blinkar
5. Now adjust the stop time and
press "Store" again. The text
field shows the required tem-
perature and ON.
blinkar
flashes
3. Press the button with the arrow
until the On symbol (main
breaker) flashes. Press -/Off.
blinkar flashes
To switch off external start, go to
the "Ext" symbol in the on posi-
tion and press the -/Off button.
3. Press the left arrow key. The re-
quired temperature is displayed.
Then adjust the temperature
by pressing the +/On or -/Off
button.
Set
blinkar flashes
6. If you want the temperature
change to be repeated daily,
select day 0.
Auto is shown in the dis-
play when the panel returns to
standby.
17