Alde 3010 213 Installationsanleitung Seite 16

10. 230V connection
This symbol lights up when 230V is connected to the vehicle.
11. Temperature
This symbol shows the temperature
indoors in intervals of 0,5°C.
12. Working with the lower menu row
The lower menu row can be used for such things as setting the clock, external start, night temperature, automatic
start of the heater. To use the lower menu row you must activate it by doing as follows:
1. Press the button with the arrow
until the symbol for the lower
menu row flashes.
blinkar
flashes
13. Clock
To set the clock, first light up the lower row of functions (see item 12).
1. Press the button with the arrow
until the clock symbol flashes.
blinkar
flashes
4. Then step forward with the
arrow key until the minutes are
displayed. Min flashes. Use +/
On and -/Off to set the minutes.
16
2. Light up the menu row by press-
ing the +/On button.
The lower row with symbols
lights up.
blinkar
flashes
2. Press the +/On button.
Day flashes. Use +/On or -/Off
to set the weekday.
5. Press Store and the time you
have set is stored.The example
shows Tuesday, 08.35.
blinkar
flashes
This symbol shows the temperature outdoors
in intervals of 1°C. To use this function an
outdoor temperature sensor must be installed.
flashes
blinkar
3. To switch off the lower menu
row, press the -/Off button when
the symbol flashes. Activated
functions will be displayed
even if the lower menu row is
switched off.
flashes
blinkar
3. Step forward with the arrow key
until the time is displayed.
Hour flashes. Use +/On or -/Off
to set the full hour.
flashes
blinkar
If the power to the panel is
broken and the battery backup
is not connected, the clock must
be set again.
Weekday: 1-7
1=Monday
7= Sunday
Hours: 0-23
Minutes: 0-59