Alde 3010 213 Installationsanleitung Seite 13

Please read these instructions carefully before using the boiler. For Operating Instructions and Installation
Instructions of boiler, see separate instruction.
These instructions are approved for The Alde Compact 3010 boiler fitted in vehicles, boats and buildings in accord-
ance with CE no. 0845 BP0003, installation in vehicles e500 00005 and EMC e5 03 261.
Installation and repairs may only be carried out by a professional. National regulations must be adhered to.
CONTROL PANEL – FUNCTIONS AND SYMBOLS
1. The standby and on-position of the control panel
In standby, the functions which are activated in the
boiler are shown, and there is no background lighting
in the display. The control panel automatically goes to
standby from the on position after two minutes if no but-
tons are pushed or if you step to standby (left of On/Off)
with the arrow keys.
1. The control panel is on standby
and the heater is switched off.
2. Resetting the system (factory adjustment)
1. Press the Store/Reset button for
10 seconds. The control panel is
reset to the factory setting.
3. Start the heater
Start the heating with the last used settings.
If you break the power to the heater, the settings which
1. Press the button with the arrow
until "Off" (main breaker) in the
display flashes.
flashes
blinkar
Start the on position by pressing any button.
The background lighting comes on (blue light) and a
function that can be set flashes. Select a function that
can be set with the arrow keys. The settings are auto-
matically saved.
2. The control panel is on standby
and the heater is operating.
2. The main breaker to the control
panel is in the "Off" position,
Gas is on, Electricity at 1kW and
22°C.
were last used will automatically be used when the
power comes back on.
2. Press the +/On button."On"
(main breaker) in the display
flashes.
blinkar flashes
The pump is in automatic posi-
tion. The lower menu row is not
lit up.
3. The settings are ready."On"
(main breaker) is shown in the
display when the panel returns
to standby.
13