Warm Water - Alde 3010 213 Installationsanleitung

4. Switch off the heater
1. Press the button with the arrow
until "On" (main breaker) in the
display flashes.
flashes
blinkar
5. Set the desired temperature
The temperature can be set from +5°C to 30°C in intervals of 0,5°C.
1. Press the button with the arrow
until the symbol for selecting
temperature flashes.
The temperature shown is the
temperature which is set at
present (in this case 22.0°C).
flashes
blinkar
6.

Warm water

If you need more warm water you can increase the
quantity temporarily for 30 minutes by increasing the
water temperature from 50°C to 65°C.
1. Press the button with the arrow
until the symbol for selecting
warm water flashes. The "OFF"
text is shown next to the tem-
perature on the display.
flashes blinkar
If you want you can switch off more warm water before 30 minutes have elapsed.
1. Press the button with the arrow
until the warm water symbol
flashes. The "ON" text is shown
next to the temperature on the
display.
blinkar
flashes
14
2. Press the -/Off button. "Off"
(main breaker) in the display
flashes.
blinkar
flashes
2. Increase the temperature by
pressing the +/On button. Lower
the temperature by pressing the
-/Off button. The diagram shows
that we have set the tempera-
ture at 25.0°C.
flashes
blinkar
When 30 minutes have elapsed, the water temperature
returns to 50°C and the symbol goes out. When you
have selected more warm water, the circulation pump
stops.
2. Switch the warm water on by
pressing the +/ON button.
The "ON" text is shown next to
the temperature on the display.
blinkar flashes
2. Switch off the warm water by
pressing the -/Off button.
The "OFF" text is shown next to
the temperature on the display.
flashes
blinkar
3. The settings are ready. "Off"
(main breaker) is shown in the
display when the panel returns
to standby.
3. The settings are complete and
the boiler is working at the set
temperature.
3. The warm water symbol is dis-
played when the panel returns
to standby.
3. The warm water symbol goes
out when the panel returns to
standby.