Additional Functions - Albrecht Tectalk Float Bedienungsanleitung

Channel Selection
Press the CH UP or CH DOWN to select the desired channel (1-8).
The factory default start up channel is channel 1 and sub-channel 00.
Before selecting a channel for communication, always listen on it to
ensure it is not already being used. Always avoid selecting a busy
channel when the unit keeps on receiving signal from unknown parties.
Volume selection (8 Levels)
1. Press the VOL UP to increase the volume.
2. Press the VOL DOWN to decrease the volume.
The LE icon and the selected volume level (01-08) will appear on the
LC Display.

Additional Functions

Menu Operation
Press MENU button to successively select these functions.
Keytone
Roger Beep
Call Tone
Press the CH UP or CH DOWN buttons to select the desired
setting for the selected menu item. If you press and hold the CH UP or
CH DOWN buttons, the selection will move quicker.
Stop Watch
Dual Watch
Normal
Operation
CTCSS
Scan
English
CTCSS
TX Power
VOX on/off
VOX
Sensitivity
Scan
25