contents
safety guidelines ...................................... E-2
thank you... ............................................. E-3
installation ................................................ E-4
Power ....................................................................E-4
connection ............................................... E-6
Phase setting .....................................................E-7
calibration ................................................. E-7
Problems? ............................................................E-8
What's in the box?
Arcam Logo sub-bass system
<
IEC mains power lead
<
this Handbook!
<
... and congratulations for buying the Arcam Logo sub-bass loudspeaker system.
Logo can extend the bandwidth of your main (satellite) speakers by accurately revealing the low
frequency components of stereo and surround-sound programme sources. It also offers a separate
but concurrent LFE (low frequency effects) connection - this is a channeI intended by the recording
engineer to be exclusively reproduced by a subwoofer. Logo's own volume control permits the level to
be adjusted independently to achieve a perfect balance in the listening room.
Logo features its own 200W amplifier which is close-coupled to a downward-facing long-excursion
driver that takes full advantage of the latest materials technology and a sophisticated braced
cabinet design. The bass response is actively corrected by a Linkwitz transform crossover circuit to
give a Bessel alignment: this minimizes time distortion for accurate bass transients. The result is a
performance of great power and musicality.
Please take a moment to read this handbook, as the advice that it contains will help you get the
maximum benefit from your purchase.
The Logo Development Team
E-3
thank
you...